Items (0)
£0.00

RaceFX Sport Plastic Throttle Tube (Black) Honda CRF250/450 02>On CRFX250/450 04>On

  code:FXTS 10300 00BK
£6.99 (FREE UK Delivery)
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

.

Sport Series Throttle Tubes

 

RFX Sport Series Throttle Tubes are an exact replacement part at a fraction of the cost of genuine parts. They are made from a Teflon coated Nylon Fabric which provide you with a smooth action.

 

  • Replacement throttle tubes for all popular off road bikes.
  • Uses the same cam profile as the OEM part for proper throttle control.
  • Teflon coated Nylon Fabric provides smooth action.
  • Will not scar bars like aluminium tubes.
  • Open end design for use with aluminium hand guards if required.

 

 

Fitting Instructions

 

  • Slide the rubber boot down and disassemble the throttle housing, remove the old throttle tube taking care not to damage the throttle cables.
  • Carefully remove grip from the old throttle tube if required.
  • Inspect the cables and housing for excess damage or wear, clean and lube them or replace if required.
  • Clean the handlebar and inspect for damage where the old throttle tube has been spinning on the bar if a ridge is present replace the handlebars.
  • Slide the new throttle tube on the handlebar and lube using a penetrating lubricant preferably Maxima MPPL (do not use grease as this attracts dirt and makes the throttle stick after a short period of time).
  • Re-assemble the throttle cables and housing again using some penetrating lubricant.
  • Tighten the throttle housing in the correct position on the handlebars.
  • Adjust the cable to the required (free play amount) of your liking.
  • Rotate the handlebars to their maximum position to check proper operation of the throttle and correct cable routing, some re-adjustment of the cable may be required.
  • Slide the rubber boot back over the housing.
  • Cover the hole in the end of the grip with some electrical tape (To stop glue entering the throttle barrel) and apply a small amount of RFX grip glue to the outer end of the throttle tube on the outside diameter.
  • Apply a small amount of RFX grip glue to the inside of the new grip and slide onto the tube.
  • Twist the grip to the correct position and leave to dry.
  • Apply RFX safety grip wire if needed.
  • After the glue has dried again check proper operation of the throttle.   

Returns:

If you require a refund please return the item(s) to the address below along with a Returns Sheet and we will promptly refund the order in full:

Returns:
Dennis Winter Ltd
Canalhead Service Station
South Street
Leven
HU17 5NY

*If an item is returned the customer is required to cover the cost of return P&P (unless otherwise agreed.)

Shipping rates:

UK mainland (Exc. N. Ireland) = FREE DELIVERY ON ALL ORDERS.

Western Europe Up to 1KG = £7.99
Western Europe 1-2 KG = £9.99
Western Europe 2+ KG = £19.99

No credit or debit card details are held on our system and all payments are made via a sceure network.